Dental Implant Abutment Systems Market Size, 2028 (2023)

Table of Contents
Industry Statistics and InsightsThe global dental implant abutment systems market sizeis expectedto grow by USD 551.91 million over the forecasted period of 2020-2028 with an overall CAGR of 6.87%.In dental implant surgery,the metal part which serves as a base for the crown (fake tooth)is called an abutment. It acts exclusively as a connector, with one piece attached to the jawbone, while the crown is fitted on the other end. Therefore, a dental bridge may need to be replaced every (5 to 15) year.According to ACP (American College of Prosthodontists), in the United States,there are more than 3,500 prosthodontic residents andprosthodontists,approximately 40 million Americans don’t have any teeth, and 120 million people in the United States lack at least one tooth. These numbers are highly anticipated to rise in the next two decades, thus helping the market to grow during the forecasted period of 2020-2028.Stock abutments are the pre-manufactured abutments widely used by dental implant companies to fix an existing implant system. Its other applications include retaining dentures by using a male adapter attached to the implant and a female adapter attached to the denture. Moreover, Osteopenia is also one of the most common bone diseases that occurs due to the lack of calcium in the body. According to the Nature Journal, approximately 200 million people globally and 54 million people in the United States have osteoporosis, which leads to osteoporosis. It is continuously increasing at an exponential rate over the years, which in turn is stimulating market growth worldwide.All the statistics mentioned above are expected to significantly propel the Global Dental Implant Abutment Systems Market’sgrowth.COVID-19 ImpactThe sudden outbreak of the COVID-19 pandemic harmed the Dental Implant Abutment Systems Market. The worldwide government bodies have described dental treatments as ‘non-essential’ and have paused routine dental care to protect the patients from getting infected by the SARS Cov-2 virus. Thedentists have been strictly instructed to treat those dental cases designated as emergencies or patients who suffer from traumatic dental injuries. However, post-Covid -19, this market is expected to rise at a steady pace.Key Industry DriversThe Global Dental Implant Market is advancing efficiently with a CAGR of 11.78% and overall revenue of USD 3.678 billion in 2020. Each year,more than 5 million dental implantsare performed by dentists in the United States.Teeth whitening is the most common type of cosmetic dentistry and is very affordable with up to USD 600.Moreover,In the United States, approximately 37 million Americanswill use teeth whiteners in 2020. Along with teeth whitening, the massive demand for adequatedental care & cosmetic dentistry, are the major causes that are fuelling the overall enhancement of the market.Apart from the teeth whiteners, the increase in demand for dental cement applications like cavity linings for providing pulpal protection and sedation, and cementing of fixed prosthodontic appliances, simulates the market growth extensively.Furthermore, the dental implant processes like a three-piece implant, Two-piece implant, and one-piece implant, along with a steep increase in the usage of different types of abutments like Prefabricated abutments, Titanium abutments, Zirconium abutments, artificial abutments, custom implant abutment, healing abutment, etc. are widely accelerating the overall market growth.The Dental prosthesis market is growing steadily with a CAGR of 6.73% and an overall market value of USD 10.86 billion in 2020. The demand for dental prostheses and their applications worldwide, like crowns and bridges, veneers and dentures, etc., simulates the overall growth rate of the Global Market.RestraintsInfection, tooth damage, prolonged bleeding, and delayed bone healing are essential factors restraining the growth of this market. Also, the cost involved in the overall Dental Implant Abutment procedure is considerably high, which curtails its adoption and growth rate among the masses.Opportunities: -The global dental 3D Printing Market is increasing with a robust CAGR of 28.93% and with overall revenue of USD 1.758 billion in 2020. Rapid advancement in 3D printed applications has led to biocompatible 3D printed Dental Implant Abutment Systems. This application is rapidly gaining popularity all across the globe. It is estimated to grow exponentially in the future, which will highly accelerate the growth of the global dental implant abutment systems market.SegmentsAnalysisBased on Product TypeStock/Pre-Fabricated Abutment SystemsCustom Abutment SystemsBased on ApplicationsPre-millCAD/CAMBased on End-UserHospitalsDental ClinicsOthersRegional AnalysisNorth AmericaUSMexicoCanadaRest of North AmericaEuropeSwitzerlandRussiaFranceGermanyU.KFinlandTurkeyNetherlandsBelgiumSpainItalyRest of EuropeAsia PacificChinaIndiaSouth KoreaJapanSingaporeThailandIndonesiaMalaysiaPhilippinesAustraliaRest of Asia-PacificLAMEABrazilSaudi ArabiaArgentinaUruguayRest of LAMEABased on Product Type, the ‘Stock/Pre-Fabricated Abutment Systems’segment dominated the market, with a CAGR of 5.77% and overall revenue of USD 301.11 million in 2020. In the forecasted period,reduced cost and shorter time required to perform dental implants using these systems will drive the growth of this segment. On the other hand, the ‘Custom Abutment Systemsis the fastest-growing Product Type segment with an overall CAGR of 6.97%.Based on Applications, the ‘Pre-mill’segment dominated the market in 2020 due to its higher efficiency, lower cost, and rising prevalence among the users. However, the ‘CAD/CAMsegment is the fastest-growing Applications segment, with an overall CAGR of 7.71%.Based on End-User, the ‘Dental Clinics’segment dominated the market in 2020, with a revenue of USD 883.13 million and is estimated to reach a value of USD 1.53 billion by 2028 with a CAGR of 7.273%.Based on Regions, ‘North America’dominated the market with a total share of USD 487.13 million in 2020, and it is expected the market will reach a value of USD 759.67 million by 2028. The growth of the senior population and the rising prevalence of dental surgeries are the primary reasons driving the development of this region.Report AttributeDetails Forecast Period2020 - 2028The market size value in 2020USD 551.91 MillionThe revenue forecast in 2028USD XX BillionGrowth rateCAGR of approximately 6.87%The base year for estimation2020Historical data2016 – 2019UnitUSD Billion, CAGR (2020 - 2028)SegmentationBased on Product Type, Based on Applications, Based on End-User, Based on Regions.Based on Product TypeStock/Pre-Fabricated Abutment Systems, Custom Abutment Systems.Based on ApplicationsPre-mill, CAD/CAM.Based on End-User Hospitals, Dental Clinics, Others.Based on RegionNorth America, Europe, Asia Pacific, LAMIA.Country ScopeU.S, Canada, France, Germany, U.K, China, Japan, India, South Korea, Mexico, Brazil, U.A.E. etc.Company Usability ProfilesZest Dental Solutions, Ditron Dental, Zimmer Biomet, Friadent GmbH, Institut Straumann AG, Dynamic Abutment Solutions, Nobel Biocare Services AG, Glidewell Laboratories, Danaher Corp, Cortex Dental, Adin Global, and Others.Pricing and purchase optionsAvail customized purchase options to meet your exact research needs.Competitive Landscape AnalysisCompetitive Landscape Analysis is the most effective technique for adequately identifying competitors in the market around the globe. The comparison is solely performed based on the market capability, global presence, expenditure in the field of R&D company overview and financials, overall revenue generated, market initiatives, production capacity, production sites and its different facilities, organization flaws, and strengths, etc.Zest Dental SolutionsDitron DentalZimmer BiometFriadent GmbHInstitut Straumann AGDynamic Abutment SolutionsNobel Biocare Services AGGlidewell LaboratoriesDanaher CorpCortex DentalAdin GlobalOthersRecent DevelopmentsOn Feb2021, Zimmer Biometannounced that it is likely to form a new publicly-traded company named “NewCo,” which will enhance the focus to meet the requirements of the Dental patients worldwide and is estimated to deliver an immense value for the stakeholders worldwide.On Oct 2021, Zest Dental Solutionspartnered with Smile Source and launched ClariSmile Whitening Products. This ClariSmile suite of whitening products consists of all-in-one take-home syringe refills and Whitening Speed Kit. This initiative is regarded as a cost-effective technique which in turn will help to create patient confidence.The essential devices that industry leaders developName of the productFunctionKey PlayersDYNAMIC PILLAR 3.0Ensures a perfect fit that avoids any geometric modification of the prosthetic connections with the dental implant during the prosthesis manufacturing processDynamic Abutment SolutionsZNanoHelps in the recreation of topography and optical characteristics of natural teethZest Dental SolutionsOsseoShaperCreates a specific osteotomy for the co-packed Noble Biocare N1 ImplantNobel Biocare Services AG Industry Statistics and Insights COVID-19 Impact Key Industry Drivers Restraints Opportunities: - SegmentsAnalysis Regional Analysis Competitive Landscape Analysis Recent Developments Frequently Asked Question About This Report

Industry Statistics and Insights

The global dental implant abutment systems market sizeis expectedto grow by USD 551.91 million over the forecasted period of 2020-2028 with an overall CAGR of 6.87%.

In dental implant surgery,the metal part which serves as a base for the crown (fake tooth)is called an abutment. It acts exclusively as a connector, with one piece attached to the jawbone, while the crown is fitted on the other end. Therefore, a dental bridge may need to be replaced every (5 to 15) year.According to ACP (American College of Prosthodontists), in the United States,there are more than 3,500 prosthodontic residents andprosthodontists,approximately 40 million Americans don’t have any teeth, and 120 million people in the United States lack at least one tooth. These numbers are highly anticipated to rise in the next two decades, thus helping the market to grow during the forecasted period of 2020-2028.

Stock abutments are the pre-manufactured abutments widely used by dental implant companies to fix an existing implant system. Its other applications include retaining dentures by using a male adapter attached to the implant and a female adapter attached to the denture. Moreover, Osteopenia is also one of the most common bone diseases that occurs due to the lack of calcium in the body. According to the Nature Journal, approximately 200 million people globally and 54 million people in the United States have osteoporosis, which leads to osteoporosis. It is continuously increasing at an exponential rate over the years, which in turn is stimulating market growth worldwide.

All the statistics mentioned above are expected to significantly propel the Global Dental Implant Abutment Systems Market’sgrowth.

Dental Implant Abutment Systems Market Size, 2028 (1)

COVID-19 Impact

The sudden outbreak of the COVID-19 pandemic harmed the Dental Implant Abutment Systems Market. The worldwide government bodies have described dental treatments as ‘non-essential’ and have paused routine dental care to protect the patients from getting infected by the SARS Cov-2 virus. Thedentists have been strictly instructed to treat those dental cases designated as emergencies or patients who suffer from traumatic dental injuries. However, post-Covid -19, this market is expected to rise at a steady pace.

Key Industry Drivers

  • The Global Dental Implant Market is advancing efficiently with a CAGR of 11.78% and overall revenue of USD 3.678 billion in 2020. Each year,more than 5 million dental implantsare performed by dentists in the United States.Teeth whitening is the most common type of cosmetic dentistry and is very affordable with up to USD 600.Moreover,In the United States, approximately 37 million Americanswill use teeth whiteners in 2020. Along with teeth whitening, the massive demand for adequatedental care & cosmetic dentistry, are the major causes that are fuelling the overall enhancement of the market.

  • Apart from the teeth whiteners, the increase in demand for dental cement applications like cavity linings for providing pulpal protection and sedation, and cementing of fixed prosthodontic appliances, simulates the market growth extensively.

  • Furthermore, the dental implant processes like a three-piece implant, Two-piece implant, and one-piece implant, along with a steep increase in the usage of different types of abutments like Prefabricated abutments, Titanium abutments, Zirconium abutments, artificial abutments, custom implant abutment, healing abutment, etc. are widely accelerating the overall market growth.

  • The Dental prosthesis market is growing steadily with a CAGR of 6.73% and an overall market value of USD 10.86 billion in 2020. The demand for dental prostheses and their applications worldwide, like crowns and bridges, veneers and dentures, etc., simulates the overall growth rate of the Global Market.

Dental Implant Abutment Systems Market Size, 2028 (2)

Restraints

  • Infection, tooth damage, prolonged bleeding, and delayed bone healing are essential factors restraining the growth of this market. Also, the cost involved in the overall Dental Implant Abutment procedure is considerably high, which curtails its adoption and growth rate among the masses.

Opportunities: -

  • The global dental 3D Printing Market is increasing with a robust CAGR of 28.93% and with overall revenue of USD 1.758 billion in 2020. Rapid advancement in 3D printed applications has led to biocompatible 3D printed Dental Implant Abutment Systems. This application is rapidly gaining popularity all across the globe. It is estimated to grow exponentially in the future, which will highly accelerate the growth of the global dental implant abutment systems market.

SegmentsAnalysis

Based on Product Type

  • Stock/Pre-Fabricated Abutment Systems

  • Custom Abutment Systems

Based on Applications

  • Pre-mill

  • CAD/CAM

Dental Implant Abutment Systems Market Size, 2028 (3)

Based on End-User

  • Hospitals

  • Dental Clinics

  • Others

Regional Analysis

North America

  • US

  • Mexico

  • Canada

  • Rest of North America

Europe

  • Switzerland

  • Russia

  • France

  • Germany

  • U.K

  • Finland

  • Turkey

  • Netherlands

  • Belgium

  • Spain

  • Italy

  • Rest of Europe

Asia Pacific

  • China

  • India

  • South Korea

  • Japan

  • Singapore

  • Thailand

  • Indonesia

  • Malaysia

  • Philippines

  • Australia

Rest of Asia-Pacific

  • LAMEA

  • Brazil

  • Saudi Arabia

  • Argentina

  • Uruguay

  • Rest of LAMEA

Dental Implant Abutment Systems Market Size, 2028 (4)

Based on Product Type, the ‘Stock/Pre-Fabricated Abutment Systems’segment dominated the market, with a CAGR of 5.77% and overall revenue of USD 301.11 million in 2020. In the forecasted period,reduced cost and shorter time required to perform dental implants using these systems will drive the growth of this segment. On the other hand, the ‘Custom Abutment Systemsis the fastest-growing Product Type segment with an overall CAGR of 6.97%.

Based on Applications, the ‘Pre-mill’segment dominated the market in 2020 due to its higher efficiency, lower cost, and rising prevalence among the users. However, the ‘CAD/CAMsegment is the fastest-growing Applications segment, with an overall CAGR of 7.71%.

Based on End-User, the ‘Dental Clinics’segment dominated the market in 2020, with a revenue of USD 883.13 million and is estimated to reach a value of USD 1.53 billion by 2028 with a CAGR of 7.273%.

Based on Regions, ‘North America’dominated the market with a total share of USD 487.13 million in 2020, and it is expected the market will reach a value of USD 759.67 million by 2028. The growth of the senior population and the rising prevalence of dental surgeries are the primary reasons driving the development of this region.

Report Attribute

Details

Forecast Period

2020 - 2028

The market size value in 2020

USD 551.91 Million

The revenue forecast in 2028

USD XX Billion

Growth rate

CAGR of approximately 6.87%

The base year for estimation

2020

Historical data

2016 – 2019

Unit

USD Billion, CAGR (2020 - 2028)

Segmentation

Based on Product Type, Based on Applications, Based on End-User, Based on Regions.

Based on Product Type

Stock/Pre-Fabricated Abutment Systems, Custom Abutment Systems.

Based on Applications

Pre-mill, CAD/CAM.

Based on End-User

Hospitals, Dental Clinics, Others.

Based on Region

North America, Europe, Asia Pacific, LAMIA.

Country Scope

U.S, Canada, France, Germany, U.K, China, Japan, India, South Korea, Mexico, Brazil, U.A.E. etc.

Company Usability Profiles

Zest Dental Solutions, Ditron Dental, Zimmer Biomet, Friadent GmbH, Institut Straumann AG, Dynamic Abutment Solutions, Nobel Biocare Services AG, Glidewell Laboratories, Danaher Corp, Cortex Dental, Adin Global, and Others.

Pricing and purchase options

Avail customized purchase options to meet your exact research needs.

Competitive Landscape Analysis

Competitive Landscape Analysis is the most effective technique for adequately identifying competitors in the market around the globe. The comparison is solely performed based on the market capability, global presence, expenditure in the field of R&D company overview and financials, overall revenue generated, market initiatives, production capacity, production sites and its different facilities, organization flaws, and strengths, etc.

Recent Developments

  • On Feb2021, Zimmer Biometannounced that it is likely to form a new publicly-traded company named “NewCo,” which will enhance the focus to meet the requirements of the Dental patients worldwide and is estimated to deliver an immense value for the stakeholders worldwide.

  • On Oct 2021, Zest Dental Solutionspartnered with Smile Source and launched ClariSmile Whitening Products. This ClariSmile suite of whitening products consists of all-in-one take-home syringe refills and Whitening Speed Kit. This initiative is regarded as a cost-effective technique which in turn will help to create patient confidence.

The essential devices that industry leaders develop

Name of the product

Function

Key Players

DYNAMIC PILLAR 3.0

Ensures a perfect fit that avoids any geometric modification of the prosthetic connections with the dental implant during the prosthesis manufacturing process

Dynamic Abutment Solutions

ZNano

Helps in the recreation of topography and optical characteristics of natural teeth

Zest Dental Solutions

OsseoShaper

Creates a specific osteotomy for the co-packed Noble Biocare N1 Implant

Nobel Biocare Services AG

Frequently Asked Question About This Report

The global dental implant abutment systems market is expected to grow at a compound annual growth rate (CAGR) of 6.87% from 2020 to 2028 to reach USD 551.91 million by 2028.

The key players in the global market are Zest Dental Solutions, Ditron Dental, Zimmer Biomet, Friadent GmbH, Institut Straumann AG, Dynamic Abutment Solutions, Nobel Biocare Services AG, Danaher Corp, etc.

In 2020, the United States accounted for the largest market share in the global market.

Global dental implant abutment systems market share is expected to grow by USD 551.91 million over the forecasted period of 2020-2028 with an overall CAGR of 6.87.

North America is dominating the global market with an overall share of USD 487.13 million in 2020 and is estimated to reach a value of USD 759.67 million by 2028.

Stock/Pre-Fabricated Abutment Systems is the leading Product Type segment in the global market.

Dental Clinics segment is the leading and dominant End User segment in the global market.

.

Chapter 1. Introduction

1.1 Study Objectives

1.2 Market Definition

Table 1 Inclusions and Exclusions

1.3 Study Scope

1.3.1 Markets Covered

Figure 01: Market Segmentation

1.3.2 Geographic Scope

Figure 02: Market Geography covered

1.3.3 Years Considered

1.4 Stakeholders

Chapter 2. Research Methodology

2.1 Data Procurement

2.2 Paid Database

2.2.1 Secondary Data

2.2.1.1 Key Secondary sources

2.2.2 Primary Data

2.2.2.1 Primary sources

2.2.2.2 Key industry insights

2.2.2.3 Primary interviews with experts

2.2.2.4 Key primary respondent list

2.3 Market Size Estimation

2.4 Bottom-Up and Top-Down Approaches

2.4.1 Bottom-Up Approach

2.4.1.1 Approach for arriving at market size by bottom-up analysis

Figure 03: Market: Bottom-Up Approach

2.4.2 Top-Down Approach

2.4.2.1 Approach for Capturing Market Size by Top-Down Analysis

Figure 04: Market: Top-Down Approach

2.5 Market Breakdown and Data Triangulation

Figure 05: Data Triangulation

2.6 Research Methodology

2.7 Risk Assessment

Table 2: Risk Assessment

Chapter 3. Executive Summary

3.1 Market: Post-Covid-19

Figure 06: Impact of Covid-19 on Market

3.1.1 Actual Scenario

Figure 07: Realistic Scenario: Market, 2020–2028 (USD Million)

3.1.2 Pessimistic Scenario

Figure 08: Pessimistic Scenario: Market, 2020–2028 (USD Million)

3.1.3 Optimistic Scenario

Figure 09: Optimistic Scenario: Market, 2020–2028(USD Million)

3.1.4 Market Summary

Figure 10: Stock/Pre-Fabricated Abutment Systems to Witness Highest CAGR in Market, By Product Type, During Forecast Period

Figure 11: Dental Clinics to Witness Higher CAGR in Market for End-User Segment during Forecast Period

Figure 12: Pre-mill

for Application to Register Highest CAGR in Market during Forecast Period

Figure 13: North America to Account for Largest Share of Global Market In 2020

Chapter 4. Market Definitions

4.1 Market Segmentation

Figure 14: Market Segmentation

Chapter 5. Industry Outlook

5.1 Global Dental Implant Abutment Systems Market Snapshot

5.2 Global Market

5.2.1 Global Market, 2020 – 2028 (USD Million)

5.3 Regional Segment Analysis

5.3.1 Global Market, by region, 2020 - 2028 (USD Million)

5.4 Type Segment Analysis

5.4.1 Global Market, By Product Type, 2020 - 2028 (USD Million)

5.5 End-User Analysis

5.5.1 Global Market, by End-User, 2020 - 2028 (USD Million)

5.6 Usage Segment Analysis

5.6.1 Global Market, by Application, 2020 - 2028 (USD Million)

5.7 By Usage Business Analysis

5.8 Value Chain Analysis

5.9 Market Variable Analysis

5.9.1 Market Drivers Analysis

5.9.2 Market Restraints Analysis

5.10 Business Environment Analysis Tool

5.10.1 Market PEST analysis

5.10.2 Market Porter’s analysis

5.11 Penetration & Growth Prospect Mapping

Chapter 6. Market Overview

6.1 Introduction

6.2 Market Dynamics

Figure 15 Market: Drivers, Restraints, Opportunities, and Challenges

6.2.1 Drivers

Figure 16 Market Drivers and Their Impact

6.2.2 Restraints

Figure 17 Market Restraints and Their Impact

6.2.3 Opportunities

Figure 18 Market Opportunities and Their Impact

6.2.4 Challenges

Figure 19 Market Challenges and Their Impact

6.3 Impact of Covid-19 on Market

6.4 Value Chain Analysis

Figure 20 Value Chain Analysis: Market

6.5 Ecosystem

Figure 21 Market: Ecosystem

Table 3 Market: Ecosystem

Figure 22 Revenue Shift in Market

6.6 Patent Analysis

Table 4 Number of Patents Registered in Market in USA in Last 9 Years

Figure 23 Top 12 Companies with Highest No. of Patents in Last 9 Years

Figure 24 No of Patents Granted Per Year, 2019–2020

Table 5 List of Global Patents in Market

6.7 Trade Analysis

Figure 25 Import Data for Stock/Pre-Fabricated Abutment Systems, By Country, 2016–2020 (USD Thousand)

Table 6 Import Data for Custom Abutment Systems, By Country, 2016–2020 (USD Thousand)

Figure 26 Export Data for Stock/Pre-Fabricated Abutment Systems, By Country, 2016–2020 (USD Thousand)

Table 7 Export Data for Custom Abutment Systems, By Country, 2016–2020 (USD Thousand)

6.8 Case Study Analysis

6.9 Porter’s Five Forces Analysis

Table 8 Market: Porter’s Five Forces Analysis, 2020

6.9.1 Threat of New Entrants

6.9.2 Threat of Substitutes

6.9.3 Bargaining Power of Buyers

6.9.4 Bargaining Power of Suppliers

6.9.5 Degree of Competition

6.10 Technology Analysis

6.10.1 Trends in Technology (2014-2020)

6.10.2 Trends in Technology (2021-2028)

Table 9 Key Regulations: Market

6.11 Pricing Analysis

6.11.1 Average Price Trend Analysis (By region, By Countries)

Chapter 7. Competitive & Vendor Landscape

7.1 Company Market Share Analysis

Table 10: Key Players market share

Figure 27: Key players market share of companies

7.2 Manufacturers Dental Implant Abutment Systems Manufacturing Sites, Area Served, Product Type

7.3 Market Competitive Situation and Trends

7.4 Manufacturers Mergers & Acquisitions, Expansion Plans

Chapter 8. Global Market: Type Segment Analysis

8.1 Introduction

8.2 Sales Volume & Revenue Analysis (2020-2028)

Table 11 Market, By Product Type, 2021–2028 (USD Million)

Figure 28 Market, By Product Type

Figure 29 Stock/Pre-Fabricated Abutment Systems Segment to Register Highest CAGR in Market During Forecast Period

8.3 Stock/Pre-Fabricated Abutment Systems

8.3.1 Stock/Pre-Fabricated Abutment Systems market, 2020 - 2028 (USD Million)

Figure 30: Stock/Pre-Fabricated Abutment Systems market, 2020 - 2028 (USD Million)

8.4 Custom Abutment Systems

8.4.1 Custom Abutment Systems market, 2020 - 2028 (USD Million)

Figure 31: Custom Abutment Systems market, 2020 - 2028 (USD Million)

8.5 Others

8.5.1 Others market, 2020 - 2028 (USD Million)

Figure 32: Others market, 2020 - 2028 (USD Million)

Chapter 9. Global Market: End-User Segment Analysis

9.1 Introduction

9.2 Sales Volume & Revenue Analysis (2020-2028)

Table 12: Market, By End-User, 2021–2028 (USD Million)

Figure 33: Market, By End-User, 2021–2028 (USD Million)

Figure 34: Dental Clinics Segment to Register Highest CAGR in Market during Forecast Period

9.3 Hospitals

9.3.1 Hospitals market, 2020 - 2028 (USD Million)

Figure 35: Hospitals market, 2020 - 2028 (USD Million)

9.4 Dental Clinics

9.4.1 Dental Clinics market, 2020 - 2028 (USD Million)

Figure 36: Dental Clinics market, 2020 - 2028 (USD Million)

9.5 Others

9.5.1 Others market, 2020 - 2028 (USD Million)

Figure 37: Others market, 2020 - 2028 (USD Million)

Chapter 10. Global Market: Applications Segment Analysis

10.1 Introduction

10.2 Sales Volume & Revenue Analysis (2020-2028)

Table 13: Market, By Application, 2021–2028 (USD Million)

Figure 38: Market, By Application, 2021–2028 (USD Million)

Figure 39: Pre-mill Segment to Register Highest CAGR in Market during Forecast Period

10.3 Pre-mill

10.3.1 Pre-mill market, 2020 - 2028 (USD Million)

Figure 40: Pre-mill market, 2020 - 2028 (USD Million)

10.4 CAD/CAM

10.4.1 CAD/CAM market, 2020 - 2028 (USD Million)

Figure 41: CAD/CAM market, 2020 - 2028 (USD Million)

Chapter 11. Global Market: Regional Outlook

11.1 North America

Figure 42: North America Market, By Revenue Forecast (2020-2028)

11.1.1 North America Market, by country, 2020 - 2028 (USD Million)

Table 14: North America Market, by Country, 2020-2028

Figure 43: North America Market

11.1.2 North America Market, By Product Type, 2020 - 2028 (USD Million)

Table15: North America Market, By Product Type, 2020 - 2028 (USD Million)

Figure 44: North America Market, By Product Type, 2020 - 2028 (USD Million)

11.1.3 North America Market, by End-User, 2020 - 2028 (USD Million)

Table 16: North America Market, by End-User, 2020 - 2028 (USD Million)

Figure 45: North America Market, by End-User, 2020 - 2028 (USD Million)

11.1.4 North America Market, by Application, 2020 - 2028 (USD Million)

Table 17: North America Market, by Application, 2020 - 2028 (USD Million)

Figure 46: North America Market, by Application, 2020 - 2028 (USD Million)

11.1.5 U.S.

11.1.5.1 U.S. Market, By Product Type, 2020 - 2028 (USD Million)

Figure 47: U.S. Market, By Product Type, 2020 - 2028 (USD Million)

11.1.5.2 U.S. Market, by End-User, 2020 - 2028 (USD Million)

Figure 48: U.S. Market, by End-User, 2020 - 2028 (USD Million)

11.1.5.3 U.S. Market, by Application, 2020 - 2028 (USD Million)

Figure 49: U.S. Market, by Application, 2020 - 2028 (USD Million)

11.1.6 Canada

11.1.6.1 Canada Market, By Product Type, 2020 - 2028 (USD Million)

Figure 50: Canada Market, By Product Type, 2020 - 2028 (USD Million)

11.1.6.2 Canada Market, by End-User, 2020 - 2028 (USD Million)

Figure 51: Canada Market, by End-User, 2020 - 2028 (USD Million)

11.1.6.3 Canada Market, by Application, 2020 - 2028 (USD Million)

Figure 52: Canada Market, by End-User, 2020 - 2028 (USD Million)

11.1.6.4 Canada Market, by Application, 2020 - 2028 (USD Million)

Figure 53: Canada Market, by End-User, 2020 - 2028 (USD Million)

11.2 Europe

Figure 54: Europe Market, By Revenue Forecast (2020-2028)

11.2.1 Europe Market, by country, 2020 - 2028 (USD Million)

Table 18: Europe Market, by country, 2020 - 2028 (USD Million)

Figure 55: Europe Market, by country, 2020 - 2028 (USD Million)

11.2.2 Europe Market, By Product Type, 2020 - 2028 (USD Million)

Table 19: Europe Market, By Product Type, 2020 - 2028 (USD Million)

Figure 56: Europe Market, By Product Type, 2020 - 2028 (USD Million)

11.2.3 Europe Market, by End-User, 2020 - 2028 (USD Million)

Table 20: Europe Market, by End-User, 2020 - 2028 (USD Million)

Figure 57: Europe Market, by End-User, 2020 - 2028 (USD Million)

11.2.4 Europe Market, by Application, 2020 - 2028 (USD Million)

Table 21: Europe Market, by Application, 2020 - 2028 (USD Million)

Figure 58: Europe Market, by Application, 2020 - 2028 (USD Million)

11.2.5 U.K.

11.2.5.1 U.K. Market, By Product Type, 2020 - 2028 (USD Million)

Figure 59: U.K. Market, By Product Type, 2020 - 2028 (USD Million)

11.2.5.2 U.K. Market, by End-User, 2020 - 2028 (USD Million)

Figure 60: U.K. Market, by End-User, 2020 - 2028 (USD Million)

11.2.5.3 U.K. Market, by Application, 2020 - 2028 (USD Million)

Figure 61: U.K. Market, by Application, 2020 - 2028 (USD Million)

11.2.6 Germany

11.2.6.1 Germany Market, By Product Type, 2020 - 2028 (USD Million)

Figure 62: Germany Market, By Product Type, 2020 - 2028 (USD Million)

11.2.6.2 Germany Market, by End-User, 2020 - 2028 (USD Million)

Figure 63: Germany Market, by End-User, 2020 - 2028 (USD Million)

11.2.6.3 Germany Market, by Application, 2020 - 2028 (USD Million)

Figure 64: Germany Market, by Application, 2020 - 2028 (USD Million)

11.2.7 France

11.2.7.1 France Market, By Product Type, 2020 - 2028 (USD Million)

Figure 65: France Market, By Product Type, 2020 - 2028 (USD Million)

11.2.7.2 France Market, by End-User, 2020 - 2028 (USD Million)

Figure 66: France Market, by End-User, 2020 - 2028 (USD Million)

11.2.7.3 France Market, by Application, 2020 - 2028 (USD Million)

Figure 67: France Market, by Application, 2020 - 2028 (USD Million)

11.2.8 Rest of Europe

11.2.8.1 Rest of Europe Market, By Product Type, 2020 - 2028 (USD Million)

Figure 68: Rest of Europe Market, By Product Type, 2020 - 2028 (USD Million)

11.2.8.2 Rest of Europe Market, by End-User, 2020 - 2028 (USD Million)

Figure 69: Rest of Europe Market, by End-User, 2020 - 2028 (USD Million)

11.2.8.3 Rest of Europe Market, by Application, 2020 - 2028 (USD Million)

Figure 70: Rest of Europe Market, by Application, 2020 - 2028 (USD Million)

11.3 Asia Pacific

Figure 71: Asia Pacific Market, By Revenue Forecast (2020-2028)

11.3.1 Asia Pacific Market, by country, 2020 - 2028 (USD Million)

Table 22: Asia Pacific Market, by country, 2020 - 2028 (USD Million)

Figure 72: Asia Pacific Market, by country, 2020 - 2028 (USD Million)

11.3.2 Asia Pacific Market, By Product Type, 2020 - 2028 (USD Million)

Table 23: Asia Pacific Market, By Product Type, 2020 - 2028 (USD Million)

Figure 73: Asia Pacific Market, By Product Type, 2020 - 2028 (USD Million)

11.3.3 Asia Pacific Market, by End-User, 2020 - 2028 (USD Million)

Table 24: Asia Pacific Market, by End-User, 2020 - 2028 (USD Million)

Figure 74 :Asia Pacific Market, by End-User, 2020 - 2028 (USD Million)

11.3.4 Asia Pacific Market, by Application, 2020 - 2028 (USD Million)

Table 25: Asia Pacific Market, by Application, 2020 - 2028 (USD Million)

Figure 75: Asia Pacific Market, by Application, 2020 - 2028 (USD Million)

11.3.5 China

11.3.5.1 China Market, By Product Type, 2020 - 2028 (USD Million)

Figure 76: China Market, By Product Type, 2020 - 2028 (USD Million)

11.3.5.2 China Market, by End-User, 2020 - 2028 (USD Million)

Figure 77: China Market, by End-User, 2020 - 2028 (USD Million)

11.3.5.3 China Market, by Application, 2020 - 2028 (USD Million)

Figure 78: China Market, by Application, 2020 - 2028 (USD Million)

11.3.6 India

11.3.6.1 India Market, By Product Type, 2020 - 2028 (USD Million)

Figure 79: India Market, By Product Type, 2020 - 2028 (USD Million)

11.3.6.2 India Market, by End-User, 2020 - 2028 (USD Million)

Figure 80: India Market, by End-User, 2020 - 2028 (USD Million)

11.3.6.3 India Market, by Application, 2020 - 2028 (USD Million)

Figure 81: India Market, by Application, 2020 - 2028 (USD Million)

11.3.7 Japan

11.3.7.1 Japan Market, By Product Type, 2020 - 2028 (USD Million)

Figure 82: Japan Market, By Product Type, 2020 - 2028 (USD Million)

11.3.7.2 Japan Market, by End-User, 2020 - 2028 (USD Million)

Figure 83: Japan Market, by End-User, 2020 - 2028 (USD Million)

12.3.7.3 Japan Market, by Application, 2020 - 2028 (USD Million)

Figure 84: Japan Market, by Application, 2020 - 2028 (USD Million)

11.3.8 South Korea

11.3.8.1 South Korea Market, By Product Type, 2020 - 2028 (USD Million)

Figure 85: South Korea Market, By Product Type, 2020 - 2028 (USD Million)

11.3.8.2 South Korea Market, by End-User, 2020 - 2028 (USD Million)

Figure 86: South Korea Market, by End-User, 2020 - 2028 (USD Million)

12.3.8.3 South Korea Market, by Application, 2020 - 2028 (USD Million)

Figure 87: South Korea Market, by Application, 2020 - 2028 (USD Million)

11.3.9 Rest of APAC

11.3.9.1 Rest of APAC Market, By Product Type, 2020 - 2028 (USD Million)

Figure 88 : Rest of APAC Market, By Product Type, 2020 - 2028 (USD Million)

11.3.9.2 Rest of APAC Market, by End-User, 2020 - 2028 (USD Million)

Figure 89: Rest of APAC Market, by End-User, 2020 - 2028 (USD Million)

11.3.9.3 Rest of APAC Market, by Application, 2020 - 2028 (USD Million)

Figure 90: Rest of APAC Market, by Application, 2020 - 2028 (USD Million)

11.4 Latin America

Figure 91: Latin America Market, By Revenue Forecast (2020-2028)

11.4.1 Latin America Market, by country, 2020 - 2028 (USD Million)

Table 26: Latin America Market, by country, 2020 - 2028 (USD Million)

Figure 92: Latin America Market, by country, 2020 - 2028 (USD Million)

11.4.2 Latin America Market, By Product Type, 2020 - 2028 (USD Million)

Table 27: Latin America Market, By Product Type, 2020 - 2028 (USD Million)

Figure 93: Latin America Market, By Product Type, 2020 - 2028 (USD Million)

11.4.3 Latin America Market, by End-User, 2020 - 2028 (USD Million)

Table 28: Latin America Market, by End-User, 2020 - 2028 (USD Million)

Figure 94: Latin America Market, by End-User, 2020 - 2028 (USD Million)

11.4.4 Latin America Market, by Application, 2020 - 2028 (USD Million)

Table 29: Latin America Market, by Application, 2020 - 2028 (USD Million)

Figure 95: Latin America Market, by Application, 2020 - 2028 (USD Million)

11.4.5 Brazil

11.4.5.1 Brazil Market, By Product Type, 2020 - 2028 (USD Million)

Figure 96: Brazil Market, By Product Type, 2020 - 2028 (USD Million)

11.4.5.2 Brazil Market, by End-User, 2020 - 2028 (USD Million)

Figure 97: Brazil Market, by End-User, 2020 - 2028 (USD Million)

11.4.5.3 Brazil Market, by Application, 2020 - 2028 (USD Million)

Figure 98: Brazil Market, by Application, 2020 - 2028 (USD Million)

11.4.6 Mexico

11.4.6.1 Mexico Market, By Product Type, 2020 - 2028 (USD Million)

Figure 99: Mexico Market, By Product Type, 2020 - 2028 (USD Million)

11.4.6 2 Mexico Market, by End-User, 2020 - 2028 (USD Million)

Figure 100: Mexico Market, by End-User, 2020 - 2028 (USD Million)

11.4.6.3 Mexico Market, by Application, 2020 - 2028 (USD Million)

Figure 101: Mexico Market, by Application, 2020 - 2028 (USD Million)

11.4.7 Rest of the Latin America

11.4.7.1 Rest of the Latin America Market, By Product Type, 2020 - 2028 (USD Million)

Figure 102: Rest of the Latin America Market, By Product Type, 2020 - 2028 (USD Million)

11.4.7.2 Rest of the Latin America Market, by End-User, 2020 - 2028 (USD Million)

Figure 103: Rest of the Latin America Market, by End-User, 2020 - 2028 (USD Million)

11.4.7.3 Rest of the Latin America Market, by Application, 2020 - 2028 (USD Million)

Figure 104: Rest of the Latin America Market, by Application, 2020 - 2028 (USD Million)

11.5 MEA

Figure 105: MEA Market, By Revenue Forecast (2020-2028)

11.5.1 MEA Market, By Product Type, 2020 - 2028 (USD Million)

Figure 106: MEA Market, By Product Type, 2020 - 2028 (USD Million)

11.5.2 MEA Market, by End-User, 2020 - 2028 (USD Million)

Figure 107: MEA Market, by End-User, 2020 - 2028 (USD Million)

11.5.3 MEA Market, by Application, 2020 - 2028 (USD Million)

Figure 108: MEA Market, by Application, 2020 - 2028 (USD Million)

Chapter 12. Competitive Landscape

12.1 Zest Dental Solutions.

12.1.1 Company overview

12.1.2 Financial performance

12.1.3 Product Portfolio Analysis

12.1.4 Business Strategy & Recent Development

12.2Ditron Dental.

12.2.1 Company overview

12.2.2 Financial performance

12.2.3 Product Portfolio Analysis

12.2.4 Business Strategy & Recent Development

12.3Zimmer Biomet

12.3.1 Company overview

12.3.2 Financial performance

12.3.3 Product Portfolio Analysis

12.3.4 Business Strategy & Recent Development

12.4Friadent GmbH.

12.4.1 Company overview

12.4.2 Financial performance

12.4.3 Product Portfolio Analysis

12.4.4 Business Strategy & Recent Development

12.5Institut Straumann AG.

12.5.1 Company overview

12.5.2 Financial performance

12.5.3 Product Portfolio Analysis

12.5.4 Business Strategy & Recent Development

12.6Dynamic Abutment Solutions.

12.6.1 Company overview

12.6.2 Financial performance

12.6.3 Product Portfolio Analysis

12.6.4 Business Strategy & Recent Development

12.7Nobel Biocare Services AG.

12.7.1 Company overview

12.7.2 Financial performance

12.7.3 Product Portfolio Analysis

12.7.4 Business Strategy & Recent Development

12.8Glidewell Laboratories.

12.8.1 Company overview

12.8.2 Financial performance

12.8.3 Product Portfolio Analysis

12.8.4 Business Strategy & Recent Development

12.9Danaher Corp.

12.9.1 Company overview

12.9.2 Financial performance

12.9.3 Product Portfolio Analysis

12.9.4 Business Strategy & Recent Development

12.10Cortex Dental.

12.10.1Company overview

12.10.2Financial performance

12.10.3Product Portfolio Analysis

12.10.4Business Strategy & Recent Development

12.11Adin Global.

12.11.1Company overview

12.11.2Financial performance

12.11.3Product Portfolio Analysis

12.11.4Business Strategy & Recent Development

12.12Others.

12.12.1Company overview

12.12.2Financial performance

12.12.3Product Portfolio Analysis

12.12.4Business Strategy & Recent Development

Top Articles
Latest Posts
Article information

Author: Zonia Mosciski DO

Last Updated: 02/08/2023

Views: 6059

Rating: 4 / 5 (71 voted)

Reviews: 94% of readers found this page helpful

Author information

Name: Zonia Mosciski DO

Birthday: 1996-05-16

Address: Suite 228 919 Deana Ford, Lake Meridithberg, NE 60017-4257

Phone: +2613987384138

Job: Chief Retail Officer

Hobby: Tai chi, Dowsing, Poi, Letterboxing, Watching movies, Video gaming, Singing

Introduction: My name is Zonia Mosciski DO, I am a enchanting, joyous, lovely, successful, hilarious, tender, outstanding person who loves writing and wants to share my knowledge and understanding with you.